Sunkun Technology Service hotline
(+86)0755-28995058
(+86)0755-28995058
As we know, general uv light curing machine work have to use the uv lamp, so when using mechanical, light switch for uv light curing machine should pay attention to what? Here introduce you to everyone.
(1) should be progressive, turn on the light turn on the light, each lamp interval 1 minute or so, don't open at the same time;
(2), turn off the lights shall take the fan continues to run after a period of time, straight to the cooling tubes;
(3), after turn off the lights if you want to start, be sure to wait to cool completely before starting the tubes, or in the case of tube surface temperature high is starting up.
(4), not immediately put into production after turn on the light, want to have a lamp preheating time, summer at high temperature, preheat time is short;
(5), winter low temperature, preheat time longer, preheat time is 2-3 minutes. If UV device has a weak light, should be the strong light file starting turn on the light, so that we can shorten the lamp preheating time, if the production need to weak light, can be at the end of the preheat to weak light.
In addition, if you want to find a professional uv light curing, or want to know more information, please visit three kun technology co., LTD. Web site http://www.szxhuv.com/ or call our 0755-28995058 (+ 86), we will serve you wholeheartedly.
Related searches: UV machine, UV light solid machine UV light curing machine