Sunkun Technology Service hotline
(+86)0755-28995058
(+86)0755-28995058
As everybody knows, specializing in the UV curing machine is a kind of good quality of curing equipment, used in UV curing process, the proper use of light switch is especially important. So how to use the machine better? For this problem, first of all, from the use of UV curing machine lamp switch is introduced:
(1),should be progressive, turn on the light turn on the light, each lamp interval 1 minute or so, don't open at the same time;
(2), turn off the lights shall take the fan continues to run after a period of time, straight to the cooling tubes;
(3), after turn off the lights if you want to secondary starting, be sure to wait to cool completely before starting the tubes, or in the case of tube surface temperature high is starting up.
(4), not immediately put into production after turn on the light, want to have a lamp preheating time, summer at high temperature, preheat time is short; Winter low temperature, preheat time longer, preheat time is 2-3 minutes.
In addition, if the UV equipment have weak light unit, should be the strong light file starting turn on the light, so that we can shorten the lamp preheating time, if the production need to weak light, can be at the end of the preheat to weak light.